TANDBERG 880 User Manual page 65

VNC Settings*
Address
The IP-address of the PC with the VNC software installed. To find the IP-address of the PC, select 'Command
Prompt' from the Startup-menu. Type 'ipconfig' and press ENTER.
Display Number
The display number for VNC is 0 and upwards. If you are using WinVNC, double-click on the icon on the toolbar
to view 'WinVNC properties'. This number should correspond with 'Display Number' in this menu.
Password
Enter the same password as specified in WinVNC properties. The password will be shown as asterisk signs (*)
the next time you enter the menu.
Start using VNC
To activate VNC, press 'PC' on the remote control. See also 'PC SoftPresenter' section for further information.
* - Requires option 'Presenter'. To check which options are installed, see the 'System Info' menu in 'Diagnostics'.
TANDBERG Videoconferencing System
VNC S
NOTE
• B
OTH THE
CONNECTED TO THE SAME
• A VNC
DOWNLOADED FROM HTTP
• I
NSTALL THE SOFTWARE BY RUNNING THE DOWNLOADED FILE
• T
O CONFIGURE THE
• S
ELECT
• S
ELECT
SYSTEM MUST THEN HAVE THE VALUE
• E
NTER A PASSWORD IN THE
'VNC S
THE
65
S S
ERVER OFTWARE ETUP
PC
AND THE VIDEOCONFERENCING SYSTEM MUST BE
LAN.
SERVER MUST BE INSTALLED ON THE
:// . .
WWW UK RESEARCH
VNC S
ERVER SOFTWARE
"A S C
CCEPT OCKET ONNECTIONS
"A " "D N
UTO FOR ISPLAY UMBER
0.
"P
ASSWORD
' .
ETTINGS ON YOUR SYSTEM
Advanced use
PC. F
REE SOFTWARE CAN BE
. . /
ATT COM VNC
.
:
".
". 'D N '
ISPLAY UMBER IN THE
"- . M
FIELD UST CORRESPOND WITH