TANDBERG 880 User Manual page 64

Advanced use
VGA Settings
VGA Out
To enhance the local video quality, a VGA monitor may be connected.
Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1 and 2 will
be disabled.
Dual: Should be used if you want to use a VGA monitor as your dual monitor. Video output 3 will
be disabled.
Off: Should be used if you want to use a TV monitor as your main monitor.
VGA Out Quality
VGA Out Quality changes the resolution of the VGA signal available on the 'VGA Out' connector at the rear of the
codec.
Auto: Will sense the resolution on the 'VGA input' port and use the same resolution on the 'VGA Out' port.
VGA: Will force 'VGA out' to VGA(640X480).
SVGA: Will force 'VGA out' to SVGA(800X600).
XGA: Will force 'VGA out' to XGA(1024X768).
TANDBERG Videoconferencing System
64
I 'VGA O '
NOTE F YOU SET UT
VGA-
YOU HAVE A MONITOR CONNECTED TO THE
VGA-
OUTPUT ON THE SYSTEM
CIF
NOTE I WILL NOT BE AVAILABLE WHEN
M D .
AIN OR UAL
'M ',
TO AIN MAKE SURE
.
VGA O
UT IS