Table of Contents
Advertisement
Quick Setup
Basic H. Services Setup via Content Server Interface – Step 1
About Basic H. Services
A quick basic setup of your TANDBERG
Content Server includes:
1.
Setting up H.323 services via the Content
Server interface
Making a test call recording
.
.
Changing the administrator password and
setting up server date and time on the
Windows Server.
In addition there is an optional QuickTime
Installation available. This installation is only
needed if you require calls to be recorded and
streamed in the QuickTime® format.
If you will be recording calls in two
formats only – Windows Media and
Real Media formats, you do NOT need
to install QuickTime on the server.
Make sure that the E.164 aliases and
H.323 IDs are valid for your Gatekeep-
er or Border Controller.
You can register the Content Server with
either Gatekeeper or Border Controller.
For simplicity in this User guide we'll use
'gatekeeper' to refer to either device.
The default local administrator account
!
should be used for administrative
functions such as system upgrades
and updates and when using Remote Desktop
access to the Content Server. It is therefore
very important to change your password as
described in the
Windows Server Setup
section.
For more on setting the administrative
properties and user configuration, see
the
Administrator Settings
section.
Table of
What's New in
Trademark/
Contents
this Version?
Licenses
D 13898.04
DECEMBER 2006
Start a Web browser and enter the IP
address of the Content Server. You
can use either http or https, with
https recommended for administrative
access.
Go to the
Administrator Settings
>
Settings
System Name
to set the
E.1 alias
for the Content Server.
Safety/
Introduction
Installation
Environmental
Initial Setup
When prompted for login, enter the
username administrator and
password.
Site
If required, set
Gatekeeper registra-
tion
Enabled
Gatekeeper
and
to
, select
Discovery method
(
Auto
and set the
Gatekeeper IP address
You can choose to register the Content
Server as a Terminal or a Gateway. If you
select
Gateway registration
need to enter H.323 and E.164 Gateway
prefixes.
Quick Setup
Operation
0
TANDBERG
Go to
Conference Setup
Alias Options
. Edit the E.164 aliases
and H323 IDs for the default Recording
Aliases and save.
Save the
Site Settings
the browser page to check if gatekeeper
or
Manual
)
registration has been successful.
.
, you will
Administrator
Conference
Settings
Setup
Conferences
CONTENT SERVER
USER GUIDE
>
Recording
. You may refresh
View
Appendices
Advertisement
Table of Contents
