Isdn/External/Leased E1/T1 - TANDBERG 6000 MXP Profile User Manual

5.8.1

ISDN/External/Leased E1/T1

Network Before using the system it is necessary to specify which network to use and
Type define its settings.
ISDN- If you want to use your system via ISDN-BRI, you should select Network Type:
BRI ISDN-BRI and enter the ISDN BRI Settings menu to set the BRI parameters.
ISDN- If you want to use your system via ISDN-PRI, you should select Network Type:
PRI* ISDN-PRI and enter the ISDN PRI Settings menu to set the PRI parameters.
Leased If you want to use your system via Leased E1/T1, you should select Network
E1/T1* Type: Leased E1/T1 and enter the Leased E1/T1 Settings (see
Settings) menu to set the Leased E1/T1 parameters.
External If you want to use special networks and connect using RS449, V.35, X.21 or
connect to ISDN via an external IMUX, you should select Network Type: External
and enter the External Network Settings (see
set the External Network parameters.
*Note that both Leased E1/T1 and ISDN-PRI uses the same interface on the codec marked E1/T1.
Leased E1/T1
External Network Settings
General Use
menu to
199