TANDBERG 6000 User Manual page 42

General use
Adding an extra site - dial out
First establish a normal point-to-point call. It is recommended to plan the bandwidth usage before making the first
call so that you do not run out of bandwidth.
E : I
XAMPLE F THE SYSTEM HAS
. T
FOR THE FIRST CALL HE SYSTEM WILL THEN AUTOMATICALLY USE
When the first site is connected, add a site to the conference using the following procedure:
connect
• Press C
ONNECT
• Press 'Add Site' to bring up the MultiSite dial menu.
• Enter the number to call.
The Quality will, by default, be the same as used by the first call. To place a telephone call instead of a video call,
press 'Quality' and select 'Teleph' in the Quality menu.
To use another network operator, press 'Net' and select operator in the Net menu.
connect
• Press C
ONNECT
I
T IS POSSIBLE TO CONNECT SEVERAL TELEPHONES
TIP
TANDBERG Videoconferencing System
512
KBPS AVAILABLE AND YOU WANT TO CONNECT
to bring up the following menu:
, . . 2
E G VIDEO SYSTEMS
3
SITES IN ADDITION TO THE HOST
128
KBPS WHEN CONNECTING THE OTHER SITES
NOTE
I
F THE
BANDWIDTH TO ADD ANOTHER SITE
WILL AUTOMATICALLY DOWNSPEED TO ALLOW AN
ADDITIONAL SITE TO BE ADDED TO THE
CONFERENCE
SUPPORT
BANDWIDTH
C
TIP
BANDWIDTH FIRST IN ORDER TO OPTIMIZE
CONNECTION TIME
+ 3 (
TELEPHONES A TOTAL OF
42
, 128
KBPS SHOULD BE SELECTED
.
M S
ULTI ITE SYSTEM DOES NOT HAVE ENOUGH
,
. R : F
EQUIREMENT AR
D
OWNSPEED AND MUST HAVE ENOUGH
.
ONNECT THE SYSTEM WITH THE LOWEST
.
5 ).
SITES
THE SYSTEM
E
ND MUST