Table of Contents
Advertisement
TANDBERG Content Server User Manual
4.4.7.2 Windows Media
Up to three writers are permitted for a Windows Media template (this means that three outputs
can be generated for this format).
Each writer will have the following Information:
Profile filename
Audio only
Check this box if you require an audio only output.
Streaming path
Enter the path here if you would like the conference to be streamed
live. If you leave this field blank, the movie will not be streamed live.
The streaming path in writer information should be in the format:
mms:// <servername>/<publishing point>
On demand
Enter the path here if you would like the conference to be available
path
on demand. If you leave this field blank, the movie will still be written
to the server but will not be displayed in the interface.
The on-demand path in writer information should be in the format:
mms:// <server name>
On demand
Choose File output if you want to stream content on demand from
output
the Content Server. Choose Server Push Output if you want to
stream on demand content from an external server.
Source
Choose Source: Normal video for video or video with
snapshots/slides.
42
Select the right profile for the required type of output. Profiles
determine the type of codec used for recording, the streaming bit
rate, video framerate and video resolution.
Examples:
WM8_384K(15fps).prx – this profile will encode to a
Windows Media file using Windows Media codec 8, at 15
frames per second and a bitrate suitable for a 384K
Internet connection.
WM8_128K(dual).prx – this profile will encode to a
Windows Media file using Windows Media codec 8 and a
bitrate suitable for a 128K Internet connection.
Advertisement
Table of Contents
