Download Print this page

Warmtec HT200 User Manual

Download this manual

Manual

INFRARED HEATER

HT200

Table of Contents

Page 1 Manual INFRARED HEATER HT200...
Page 2: Use And Maintenance
USE AND MAINTENANCE 1. CAUTION REGARDING THE SECURITY Instructions should be carefully read before installation and retained by the user. The booklet must be keeped and delivered to the new user in case of cession of the machine. The Manufacturer reserves the right to vary the features of the product without prior notice.
Page 3 Children should be supervised to ensure that they do not play with the appliance. 10. This heating appliance does not feature a device to control ambi- ent temperature. Do not use it in small rooms used by people who are unable to leave such rooms on their own unless they are under constant surveillance.
Page 4 (*) Cable minimum section - per 5 m length. Table 1 The HT200 infrared heater are intended for indoor use only and must be kept away from moisture and dust. Keep the indicated distances between the heater and the wall/ceil- ing (fig.
Page 5: Technical Features
E holes by means of the “S” shaped rings enclosed inside the packaging. 3. TECHNICAL FEATURES Model HT200 Power supply 220-240 V ~ 50-60 Hz Power 1 x 2000 W...
Page 6: Maintenance
Due to the special sealing and anti-shock design of the heater, the emitters are not intended to be user replaceable. Please ensure that all emit - ters are replaced via the WARMTEC service network.
Page 7 Fig. 1 Fig. 2...