Sauder 421191 Instruction Booklet page 21

Step 16
Apply TAPE from the TAPE CARDS (4M) to the DOOR
å
MOLDINGS (J and K) exactly as shown. Then, peel off the
backing from the TAPE on the DOOR MOLDINGS.
Fasten the DOOR MOLDINGS (J and K) to the DOOR (O).
å
Use six PLASTIC WASHERS (9I) and six BLACK 3/4" PAN
HEAD SCREWS (85S).
These surfaces of the
DOOR MOLDINGS and
DOOR should be even.
K
www.sauder.com/service
J
K
J
O
(6 used)
BLACK 3/4" PAN HEAD SCREW
9I
421191
4M
These
smaller holes
must be here.
85S
(6 used in this step)
Page 21