Rear - Sauder 421191 Instruction Booklet

Step 11 Step
Carefully turn your unit over onto its front edges.
å
Unfold the BACK (M2) and lay it over your unit.
å
A perforation in the BACK (M2) has been provided for access
å
to the SAFETY STRAP. Punch out the perforation and push the
SAFETY STRAP through the hole.
Fasten the BACK (M2) to the REAR LEGS (P). Use four BLACK
å
9/16" LARGE HEAD SCREWS (1S).
Finish fastening the BACK (M2) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes
å
that line up over the UPRIGHT (C).
Before fastening the BACK,
punch out the perforation
and push the SAFETY
STRAP through the hole.
NAIL
(60 used in this step)
Page 16
A
NOTE: Fasten the BACK with
1N
four BLACK 9/16" LARGE
HEAD SCREWS (1S) before
using the NAILS (1N).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
M2
C
P
421191
Caution
1S
P
www.sauder.com/service