Advertisement
154574-00/2610-220
5/17/02
1:45 PM
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (including brush inspection and replacement) should be
performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Accessories
Recommended accessories for use with your tool are available at extra cost
from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be hazardous.
If you need any assistance in locating any accessory call 1-800-9-BD TOOL:
(1-800-923-8665) or contact Black & Decker (U.S.) Inc., Consumer Services
Department, 626 Hanover Pike, P.O. Box 618, Hampstead, MD 21074.
MAXIMUM RECOMMENDED CAPACITIES
Steel twist bit
1/2"
Auger
1-1/2"
Self-feed
3"
Spade
1-1/2"
Wood holesaw
5"
Steel holesaw
4"
ACCESSORY MUST BE RATED FOR USE AT SPEED EQUAL TO OR HIGHER
THAN NAMEPLATE RPM OF TOOL WITH WHICH IT IS BEING USED.
Page 5
If you wish to contact us regarding this product, please call toll
One Year Free Maintenance
All B&D tools for Industry and Construction are covered under a one year
free maintenance program where B&D will inspect your tool for safety and
provide necessary maintenance or repairs, including normal wear and tear
parts, for one year, FREE OF CHARGE.
Full Warranty
All B&D tools for Industry and Construction are warranted to be free of any
defects in materials or workmanship. Upon thorough examination of tool,
B&D will repair or replace, at our option, any product that is determined to
be defective.
Conditions
The service/safety check and the warranty do not apply to: repairs made or
attempted by anyone other than an authorized B&D service location; misuse,
abuse, neglect, improper application of the tool; missing parts; or normal wear
and tear (after first year of ownership). Please return the complete unit,
transportation prepaid, to any B&D factory owned or B&D authorized service
center location (list provided with tool or see yellow pages under "Tools
Electric").
5
Every B&D tool is of the highest quality.
free between 8:00am and 8:00pm ET, seven days a week:
1-800-9-BD TOOL
(1-800-923-8665)
Advertisement
