Ec Declaration Of Conformity; Machine Characteristics; Machine Parts And Controls - Baier BDB 825 Translation Of The Original Instruction Manual

3.2

EC Declaration of Conformity

We herewith declare, with sole
responsibility, that this product conforms
to the following standards or normative
documents:
EN60745-1:2009+A11:2010
EN61029-2-6:2010
EN55014-1:2006+A1:2009+A2:2011
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013
In accordance with the provisions of the
2006/42/EC (Machinery Directive)
2011/65/EU (RoHS Directive)
in conjunction with the safety instructions
documented in the instruction manual and
the specified intended use.
The head of development is authorised to write the
technical documents.
These are available from:
Maschinenfabrik OTTO BAIER GmbH,
Heckenwiesen 26,
71679 Asperg
Germany
Thomas Schwab
Managing Director
Gasper, 19.02.2018
3.3

Machine characteristics

The machines are equipped with specially
developed electronics with soft start. It monitors
the speed and the green / red indicator lights
(items 1 and 2, see Figure
most favourable work progress and therefore tool-
protecting working conditions.
Visual display
Green: Speed for optimum drilling performance
Green/red: Speed within the limit range
Red: Speed too low – stopping
If this warning signal is ignored, i.e. the feed is not
reduced, the electronics switch off on overload.
After the diamond core drill bit has stopped,
remove it from the drill hole. The machine can be
immediately restarted.
Directives
Robert Pichl
Head of development
1 ) help to achieve the
The machines are also equipped with a soft impact
mechanism. It protects the diamond segments of
the core drill bits, allows faster working and carries
the drill dust away from the diamond segments,
which in turn enables a longer tool life for the
diamond core drill bits.
The diamond drill is equipped with a personal
protection switch (PRCD - personal residual current
device).
3.4

Machine parts and controls

Diamond drill
1
1 Green LED
2 Red LED
3 Lock for ON / OFF switch
4 ON / OFF switch
5 Handle
6 Connection cable
7 Additional handle (can be mounted for left and
right-handed persons)
8 Open-ended spanner SW36
9 Open-ended spanner SW41
10 Clip for fastening extraction tube
11 Extraction tube
12 Nozzle for dust extractor hose connection
13 Dry/wet diamond core drill bit
14 Water connection with stopcock and Gardena
coupling
15 Wet adapter
16 Clip for fastening wet adapter
17 Personal protection switch PRCD
18 Soft impact feature ON / OFF switch
19 Internal thread G½"
20 External thread 1¼" UNC
21 Output shaft
22 O-ring
Centring suction plate, not included in
2
scope of supply
(necessary accessories for hand-held wet drilling,
see Tools and Accessories in the BAIER catalogue)
1 Hexagon socket head screw (Allen screw) M6
(3x)
2 Centring disc
3 Rubber sealing disc
4 Centring suction plate
5 Washers (3x)
6 Hexagonal nut M6 (3x)
7 Nozzle for dust extractor hose connection
| 37 |