Lubrication; Environment; Storage - CYBEX Arc Trainer 425A Owner's Manual

Lubrication

The Arc Trainer 425A is designed with no-maintenance parts. Although there are grease fittings on the
pillow blocks, re-lubrication of the bearings is not required.
Elevation Motor Lubrication - In time the elevation motor pivot points may develop a squeak. If a
squeak is present, the unit will need to be serviced by a qualified service technician.

Environment

Static Electricity - Depending upon where you live, you may experience dry air, causing a common
experience of static electricity. This may be especially true in the winter time. You may notice a static
build-up just by walking across a carpet and then touching a metal object. The same can hold true
while working out on your unit. You may experience a shock due to the build-up of static electricity on
your body and the discharge path of the unit. If you experience this type of situation, you may want to
increase the humidity to a comfortable level through the use of a humidifier.
Humidity - The unit is designed to function normally in an environment with a relative humidity range
of 30% to 75%.
NOTE: Do not install or use the unit in an area of high humidity, such as in the vicinity of a steam
room,sauna, indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bro-
mine could adversely affect the electronics as well as other parts of the machine.
Temperature - The unit is designed to function normally in an environment with an ambient
temperature range of 50

Storage

Humidity - The unit can be shipped and stored in an environment with a relative humidity range of
10% to 90%.
NOTE: Do not store the unit in an area of high humidity, such as in the vicinity of a steam room, sauna,
indoor pool or outdoors. Exposure to extensive water vapor, chlorine
and/or bromine could adversely affect the electronics as well as other parts of the machine.
Temperature - The unit can be shipped and stored in an environment with an ambient temperature
range of 32 o
Preventive
Maintenance
Page 4-4
Cybex Arc Trainer 425A Owner's Manual
o F (10 o C) to 104
F (0 o C) and 140 o F (60 o C) degrees.
o F (40 o C) degrees.