•
Make sure there is enough room for safe access and operation of the equipment.
•
Perform regular maintenance checks on the equipment. Also pay close attention to all areas most
susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.
•
Immediately replace worn or damaged components. If unable to immediately replace worn or
damaged components then remove from service until the repair is made.
•
Do not attempt repairs, electrical or mechanical. Seek qualified repair personnel when servicing. If
you live in the USA, contact Cybex Customer Service at 888-462-9239. If you live outside the USA,
contact Cybex Customer Service at 508-533-4300.
•
Disconnect all power before servicing the unit.
•
Keep a repair log of all maintenance activities.
•
Use only Cybex supplied components to maintain/repair the equipment.
•
Do not use attachments unless recommended for the unit by Cybex.
•
Do not operate the unit if: (1) the cord is damaged; (2) the unit is not working properly or (3) if the
unit has been dropped or damaged. Seek service from a qualified technician.
•
Do not operate electrically powered units in damp or wet locations.
•
Do not operate the unit around or where aerosol (spray) or where oxygen products are being used.
•
Do not use the unit outdoors.
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed.
Cybex Arc Trainer 425A Owner's Manual
Safety
Page 1-3
Need help?
Do you have a question about the Cybex Arc Trainer 425A and is the answer not in the manual?