Biostar NF4 AM2G Setup Manual page 91

NF4 AM2G / NF4 AM2L / NF4U AM2G
CPU Fan Start<℃>
CPU fan starts to work under smart fan function when arrive this set value.
The Choices: 32 (default).
Min= 0, Max= 127, you can key in a DEC number.
CPU Fan Full speed <℃>
When CPU temperature is reach the set value, the CPU fan will work under Full
Speed.
The Choices: 52 (default).
Min= 0, Max= 127, you can key in a DEC number.
Start PWM Value
When CPU temperature arrives to the set value, the CPU fan will work under
Smart Fan Function mode. The range is from 0~127, with an interval of 1.
The Choices: 48 (default).
Min= 0, Max= 127, you can key in a DEC number.
Slope PWM
Increasing the value of slope PWM will raise the speed of CPU fan.
The Choices: 0 PWM Value/℃, 1 PWM Value/℃, 2 PWM Value/℃(default),
4 PWM Value/℃, 8 PWM Value/℃, 16 PWM Value/℃, 32 PWM Value/℃,
64PWM Value/℃.
Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.
CPU Vcore, NB/SB Volt, +3.3V, +5.0V, +12.0V, DDR Voltage,
FSB Voltage, 5V(SB), Voltage Battery
Detect the system's voltage status automatically.
CPU Temp
This field displays the current temperature of CPU.
Current CPU FAN Speed
This field displays the current speed of CPU fan.
Current SYS FAN Speed
This field displays the current speed SYSTEM fan.
35