Kb Power On Password; Hot Key Power On - Biostar NF4 AM2G Setup Manual

NF4 AM2G / NF4 AM2L / NF4U AM2G

KB Power ON Password

Input password and press Enter to set the Keyboard power on password.

Hot Key Power ON

Choose the Hot Key combination to boot up the system.
TheChoices:Ctrl-F1(default),Ctrl-F2, Ctrl-F3, Ctrl-F4,Ctrl-F5, Ctrl-F6, Ctrl-F7,
Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12.
POWER After PWR-Fail
This setting specifies how your system should behave after a power fail or
interrupts occurs. By choosing off will leave the computer in the power off state.
Choosing On will reboot the computer. Former-Sts will restore the system to the
status before power failure or interrupt occurs.
The Choices: Off (default), On, Former-Sts.
30