Biostar NF4 AM2G Setup Manual page 74

NF4 AM2G / NF4 AM2L / NF4U AM2G
Read/Write Queue bypass
The Choices: AUTO (Default).
Bypass maximum
The Choices: AUTO (Default).
32 Byte Granularity
The Choices: AUTO (Default), 64-byte, 32-byte.
Timing Mode
The Choices: AUTO (Default), MaxMemCLK.
Memory Clock value or Limi
The Choices: DDR 400 (Default).
DQS Training Control
The Choices: Perform DQS, Skip DQS (default).
CKE base power down mode
The Choices: Enabled (default), Disabled.
CKE base powerdown
The Choices: Per Channel (default), Per CS.
Memclock tri-stating
The Choices: Disabled (default), Enabled.
Memory Hole Remapping
The Choices: Enabled (default), Disabled.
Auto Optimize Bottom IO
The Choices: Enabled (default), Disabled.
Bottom of [31:24] IO space
Auto Optimaize Maximal DRAM size when kemel Assigns PCI Resources
Done.
The Choices: C0 (default).
DDRII Timing Item
The Choices: Disabled (default), Enabled.
TwTr Command Delay
The Choices: 3 bus clocks (default).
18