Biostar NF4 AM2G Setup Manual page 73

NF4 AM2G / NF4 AM2L / NF4U AM2G
Read delay from Rx FIFO
The Choices: Auto (Default), 0.5 Clock, 1.0 Clock, 1.5 Clock, 2.0 Clock, 2.5
Clock, 3.0 Clock, 3.5 Clock, 4.0 Clock.
Drive Strength Setting
Dram driver weak mode
The Choices: Auto (Default), Normal, Weak.
CKE drive strength
The Choices: Auto (Default), 1.0X, 1.25X, 1.5X, 2.0X.
CS drive strength
The Choices: Auto (Default), 1.0X, 1.25X, 1.5X, 2.0X.
MA drive strength
The Choices: Auto (Default), 1.0X, 1.25X, 1.5X, 2.0X.
MCLK drive strength
The Choices: Auto (Default), 0.75X, 1.0X, 1.25X, 1.50X.
MD drive strength
The Choices: Auto (Default), 0.75X, 1.0X, 1.25X, 1.50X.
DQS drive strength
The Choices: Auto (Default), 0.75X, 1.0X, 1.25X, 1.50X.
Dram on-die Termination
The Choices: AUTO(Default), 75ohm, 150ohm, 50oham.
17