Grandstream Networks DP752 Administration Manual page 66

Handset Firmware
Handset Firmware
Automatic Upgrade
Provisioning
XML Config File
Password
HTTP/HTTPS User
Name
HTTP/HTTPS Password Enters password to authenticate with HTTP/HTTPS server.
Always send HTTP
Basic Authentication
Information
Verify host when using
HTTPS
Provisioning via
Config Server Path
Config File Prefix
Config File Postfix
Upload Uploads Handsets firmware.
Reboot the device after uploading to apply and use the new
firmware.
Delete Deletes previously uploaded Handsets firmware.
Enables automatic upgrade when the Handsets detects the new firmware.
Decrypts XML configuration file when encrypted.
The password used for encrypting the XML configuration file is using
OpenSSL.
Enters user name to authenticate with HTTP/HTTPS server.
Includes configured user name and password in HTTP request before receiving
authentication challenge from the server. Default is No.
Verifies host name in server certificate when using HTTPS.
Default is Yes.
Choose the method that the base station uses to request Handsets ipei config
file. Can use TFTP, HTTP or HTTPS.
Sets IP address or domain name of configuration server. The server hosts a
copy of the configuration file to be installed on the DP752.
Default is fm.grandstream.com/gs.
Note: Make sure to not prepend address with "http://" or any other protocol.
Checks if configuration files are with matching prefix before downloading them.
This field enables user to store different configuration files in one directory on
the provisioning server.
Checks if configuration files are with matching postfix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
P a g e | 66