Grandstream Networks DP752 Administration Manual page 57

Dect cordless voip system
Hide thumbs Also See for DP752:
Table of Contents

Advertisement

Matching rules:
• Specific caller ID number. For example, 8321123;
• A defined pattern with certain length using x and + to specify, where x could be
any digit from 0 to 9. Samples:
• Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and select the
custom ring tone mapped to it. The custom ring tone will be used if the phone
receives SIP INVITE with Alert-Info header in the following format:
Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for the matching rule. When the incoming caller ID
or Alert Info matches the rule, the phone will ring with the selected ring.
Allow Auto Answer
If set to "Yes", the phone will automatically turn on the speaker phone to answer
by Call-info/Alert-
incoming calls, based on the SIP Call-Info/Alert-Info header sent from the
Info
server/proxy. The default setting is "No"
Custom Alert-Info
Used exclusively to match the contents of the info parameter in the Alert-Info header
for Auto Answer
for auto answer.
The default auto answer headers will not be matched if this is defined.
No Key Entry
Initiates the call within this time interval if no additional key entry during dialing
Timeout
stage. Default is 4 seconds.
Off-Hook Auto-Dial
Waits for specified time (in seconds) after off-hook before autodialing the
Delay
preconfigured number. The range is 0 to 60 seconds.
Enable Call
Enables do not disturb, call forward and other call features via the local feature
Features
codes on the base. Otherwise, ITSP feature codes can be used. Default is Yes.
Disable Call Waiting
Disables displaying caller ID when receiving a second incoming call.
Caller ID
Default is No.
Enable Call Waiting
Enables call waiting for accounts using this profile which are set to Parallel ring
in Parallel Mode
mode. Default is No.
Disable Visual MWI
Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is No.
Transfer on
Transfers the call to the other party if the conference initiator hangs up.
Conference Hangup
Default is No.
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx: 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx: 3-digit number with the leading digit from 6 to 9.
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
P a g e
|
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp730Dp722

Table of Contents