Reiner N53a Operating Instructions Manual page 5

GB
To set the stamp wheels
Press the handle
travel, then while still holding it.
Press and hold button
Allow the handle
the handle locks in place.
You will be able to move the stamp wheels
freely with the stylus
In order to return to the print position,
simply push down on handle
You can easily place the date one day further
ahead!
(Not valid for the stamp Models N53a and N65a.)
Press the switch button
To insert the inkpad
Note: Use only oil-containing stamp ink.
Handle with caution to avoid dirt from ink!
Press the handle
travel, then, while still holding it.
Press the button
continue to hold it.
Allow the handle
the handle locks in place.
Unpack the inkpad carefully.
Squeeze the grips
inkpad and hold them.
Resting the back of the ink pad inside the
pad cradle slide the pad into the slot
the stamp.
In order to return to the print position,
simply push down on handle
1 2 3
Fig. + +
to the bottom of its
on the front plate.
to move upwards until
.
.
once.
1 4
Fig. +
to the bottom of its
on the front plate and
to move upwards until
on the back of the
of
.
To change the numbering actions
Actions
0
The same number is stamped every time.
1
Number increases after each stamping
process.
2
Number increases after every 2
stamping process.
etc.
Press the switch lever
desired action.
To park the stamp
To prolong the life of the inkpad,
park the stamp!
Press and hold button
Gently push handle
stamp clicks & locks in a raised position.
In order to return to the print position,
simply push down on handle
GB
Fig.
nd
and slide it to the
5
Fig.
on the front plate.
downwards until the
.
3