Taking Care Of Your Machine - Vax SlimVac VX50 Let's Get Started

Taking care of your machine

Removing the battery
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance
or troubleshooting checks.
Lie the handheld on Slide the battery out from
its side on a flat stable the back of the handheld.
surface. Press the
battery release button.
Emptying the dirt container
WARNING: Don't over fill the dirt container to avoid blocking the air flow through the vacuum cleaner. Do not exceed
the MAX line indicated on the dust container.
Press the handheld Ensure the battery has been removed and hold the
release clip. Pull to handheld over a bin, press the dirt release button to
separate the handheld allow dirt/debris to fall out.
from the reach wand.
Taking care of your machine
Cleaning the post-motor filter
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting
checks. For continuous best performance the filter requires cleaning at least every 3 months and should be
replaced every 12 months depending upon use. Do not use your vacuum cleaner without the filters in place.
Press the filter cover Pull to separate the filter from the filter cover/holder.
release buttons located Tap the filter and filter cover/holder over a bin to
on both sides of the filter remove any dirt/debris. Wash the filter under running
cover and pull to remove water if required (40 degrees max).
the filter from the machine.
Cleaning the filter and separator
CAUTION: Always empty the dirt container before cleaning the separator and filter and remove the battery, reach
wand/accessories from the handheld.
Turn the handheld Twist the mesh filter
over and press the dirt anti-clockwise to
container release button. unlock, lift to remove
Pull the dirt container from the separator.
forward and up away from
the handheld to remove.
24hr
Allow 24hrs or until fully
dry before replacing.
Twist the separator
anti-clockwise to
unlock, lift to remove
from the handheld.