Using Your Machine - Vax SlimVac VX50 Let's Get Started

Getting started
Charging the battery
WARNING: Do not use the vacuum cleaner when the machine is plugged in and charging.
WARNING: For best performance the terminals on the battery and vacuum cleaner must be clean and free from
dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner.
CAUTION: When using the vacuum continuously the battery pack will become hot. A hot battery pack should be left
to cool before attempting to recharge. When a hot battery pack is placed into the vacuum, the light on the vacuum
may indicate the battery pack is not ready to charge. When the battery pack cools, the charger will automatically
begin charging.
The On/Off and charging light will illuminate continuously
whilst the charger is connected.
Red light flashing – The battery is charging.
Green light – The battery is charged (after 5.5 hours).
If charging for the first time the initial charge
time is 8 hours.
CAUTION: This vacuum cleaner has a constantly rotating brushbar when the brushbar 'ON' is selected.
Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the floor surface.
The brushbar should be ON for carpets and OFF for hard floors.
Using as a slim vacuum cleaner
Squeeze the trigger For continuous power
located underneath the squeeze the trigger and
handle, the machine will push the 'Continuous
switch 'On'. The On/Off power latch' towards the
and charging light will trigger. This will lock it
illuminate green indicating into the 'On' position and
the power is on and the will continue to power the
machine is charged. machine without having
Release the trigger to to hold in the trigger.
switch the machine 'Off'. Push the latch away from
the trigger to unlock and
release the trigger.
When the vacuum
cleaner is in use the On/
Off and charging light
will illuminate and flash
red when the battery
is running low. When
the red light flashes the
machine will turn off in 20
seconds. The user should
recharge the machine.

Using your machine

Press the brushbar's
On/Off button to activate.
Repeat this process to
de-activate the brushbar.
The brushbar should be
switched ON for carpets
and OFF for hard floors.