Battery Usage Guidelines; Battery Usage; Charging The Battery - Pepperl+Fuchs Ecom Smart-Ex 02 Manual

Battery Usage

ECOM Smart-Ex 02 phone comes with a removable
®
battery. For any battery related queries contact ECOM
customer support.
WARNING
Use only ECOM certified charger and charging
cable with magnetic connector , to charge your
ECOM Smart-Ex 02.
®

Charging the Battery

The battery delivered with your smartphone is not fully
charged. We recommend to charge the phone for five
hours before using it for the first time. The full capacity
of the battery is reached after 3 to 4 complete charge/
discharge cycles.
There is a risk of explosion while charging if the
battery has been replaced by an incorrect type.
1. Insert Charger
Insert the charger plug into a power outlet.
2. Connect to Phone
The charging port is located in lower side of the
phone, below the back cover. Insert the magnetic
connector to the charging port, such that the
black arrow is positioned on the top of the
connector.
3. Charging Animation/Icon
If the battery is being charged when the phone is
switched off, a battery charging animation with
charged percentage is displayed.
If the battery is being charged while the phone
is switched on, the battery charge icon on the
home screen shows animation indicating that the
battery is being charged. After the phone is fully
charged the charging animation stops and you
can disconnect the charger from the phone.
The LED indicator on the top right corner of
the phone, shows RED when the charging is
in progress and changes to GREEN once the
charging completes.
WARNING
DO NOT charge your ECOM Smart-Ex
hazardous areas and/or with any other cable and
charger other than the provided ECOM certified
charging cable and charger.
Charging your ECOM Smart-Ex
cable/Charger and/or in a hazardous environment
will compromise the intrinsically safe nature of the
device.
12
02 inside
®
02 with a different
®