Folding & Assembly; Assembling The Handlebars; Standing The Scooter; Folding & Unfolding The Scooter - SWAGTRON Swagger 8 User Manual

Section 3
FOLDING & ASSEMBLY
Make sure the Swagger 8 is turned off before working with any of its parts. The
scooter comes mostly assembled within the package. Some minor assembly is
required before riding. All parts and tools are included.

3.1 Assembling the Handlebars

Before installing the handlebars, please check each for a small letter to indicate which
side of the scooter the handle should be attached to.
for the right side. Screw in each handle and make sure everything is securely attached.
When facing forward on the scooter, screw the handles toward you to tighten.

3.2 Standing the Scooter

1. Locate the kickstand on the side of the scooter's deck.
2. Push the kickstand down and away from the scooter. Then carefully lean the weight of
the scooter onto the kickstand.
3.3 Folding & Unfolding the Scooter
1. Pull the folding latch down to unlock the stem. Then pull the stem down towards the
deck.
2. Make sure it locks into the lowest notch. It will "click" into place.
3. To unfold the scooter, pull up the stem away from the deck. When the stem is fully
unfolded, it will lock into the topmost notch.
Before moving, lifting, or otherwise transporting the scooter, ensure it is
turned off.
10
is for the left side while
L
is
R