Section 2. Assembling & Folding Your Swagcycle™ Pro - SWAGTRON SWAGCYCLE PRO SCP-1 User Manual

Section 2. Assembling & Folding your SwagCycle™ Pro
Silver bolt
6
ENGLISH
Be careful not to position your fingers
NOTE:
between the latch and the stem. Doing so
may result in injury.
TO UNFOLD (fig. 1 & 2):
Step 1. Pull the handlebar stem upright.
Step 2. Fold the latch up to close it. It will
snap into place.
TO FOLD (fig. 3 & 4):
Step 1. Locate the silver bolt in the side
of the latch and pull it up.
Step 2. While holding the bolt up, use
your other hand to unfold the
latch by pulling it down away from
the stem. There is a notch on the
other side of the latch to make
this easier.
Step 3. With the latch undone, fold the
stem down.
SWAGTRON SwagCycle Pro Folding Electric Scooter SWAGTRON SwagCycle Pro Folding Electric Scooter
TO ATTACH THE FOOT PEGS:
• With the kickstand holding your SwagCycle™ Pro
upright, screw the Foot Pegs onto the front wheel
and ensure they are securely tightened.
TO ADJUST THE HANDLEBARS:
• Unfold the latch to rotate and
adjust the direction of the
handlebars to a comfortable
position.
• Secure the handlebars by flipping
the latch closed.
7
ENGLISH