Start-Up; Insertion/Removal Of A Cartridge - W&H Assistina MB-302 Instructions For Use Manual

7. Start-up

The cartridges must be at room temperature when they are inserted.
The cartridge spike is sharp.
Be careful not to injure yourself on the projecting spike.
Whenever you replace a cartridge:
> always clean and disinfect the cartridge compartment,
> perform the initial filling.
Observe the manufacturer's instructions on use of the disinfectant.
18
 Remove the cartridge
compartment cover.
Inserting a cartridge.

> Push the cartridge in as far
as it will go.

Insertion/removal of a cartridge

e Removing a cartridge.
> Pull out the cartridge.
Replace the cartridge

compartment cover.