Table of Contents
Advertisement
Menu point 1: PLAY A-B
SRC
Introduction:
The PLAY A-B mode places two time mark-
ers on the current CD, and the machine then
repeats the passage between the two markers
constantly.
Operation:
First locate the starting point of the passage.
(
/
Press the remote control buttons in the se-
quence shown above.
If none of the menu control buttons
(
,
/
for a period of about ten seconds after pres-
sing
button the first time, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)
The screen shows a flashing letter 'A' before
the current track number, requesting you to
enter the start marker:
'PLAY AB 08'.
Set the start marker by pressing the
button once.
OK
or
/
buttons).
or
) are pressed
flashes
PLAY AB 8
OK
START MARKER
After a short delay a flashing letter 'B' ap-
pears on the screen, requesting you to enter
the end marker; press the
again at the end of the passage you want to
hear repeated.
Once you have entered the end marker the
screen shows: 'PLAY AB', and the player
repeats the passage between the two markers
constantly.
You can end the repetition at any time by
pressing the
then switches to STOP mode, and the screen
shows the status message 'STOP'.
Variation:
Locate the start of the sequence to be re-
peated during the normal playback process,
then press the
activate the PLAY A-B point within the spe-
cial functions menu (
will start automatically. You can now set the
start and end markers by pressing the
button again.
Note:
To find the beginning or endpoints you can
use fast search backwards/forward buttons
(
/
mode ends REPEAT MIX or REPEAT
TRACK operation, and erases any existing
MEMO program.
39
PLAY AB 8
END MARKER
button. The machine
button. If you now
button), the CD
). Activating the PLAY A-B
OK
button
Hide quick links:
Advertisement
Table of Contents
