Table of Contents
Advertisement
OPERATING THE AMPLIFIER
VOLUME CONTROL
The machine features a digital volume con-
trol system. Every time you press a
button, the volume is ...
... increased (right-hand button)
... reduced (left-hand button) by 1.25 dB.
The current volume level is shown briefly on
the screen as a numeric value (0 ... 63), e.g.:
'VOLUME 32'
The enormously wide range of volume levels
(0 ... 78.75 dB) available, combined with the
perfect channel matching, provide ultra-fine,
highly accurate volume control.
SELECTING THE SOURCE DEVICE
The term source device means any compo-
nent of a Hi-Fi system which supplies a
sound signal, such as tuner, CD player, cas-
sette deck etc.
The term auditioning device means the ma-
chine which you are actually listening to.
In addition to the integral auditioning sources
TUNER and CD you can also select up to
two external auditioning sources: TV and
TAPE.
or
Press the
the auditioning device.
• The current auditioning source (e.g.
Tuner) is now shown on the screen:
'TUNER'.
• Pressing the
cycles through all the auditioning sources
on the screen.
• Release the button to select the source you
wish to listen to, and after one second the
screen shows the standard machine-
specific display for the chosen source unit.
As a basic rule you can only make a tape re-
cording from the source device which is cur-
rently selected as the auditioning source.
This signal is available at the output sockets
marked TAPE-OUT.
To switch between the auditioning source
and the recording machine (i.e. for tape
monitoring) press the
• Pressing the button repeatedly causes the
screen to alternate between the auditioning
source, e.g. 'TUNER' and the recording
machine 'TAPE'. When set to monitor
mode,
the
symbol.
• About a second after the selected source
device appears, the screen shows the stan-
dard machine-specific display for that
auditioning source.
10
button briefly to change
button repeatedly
button.
screen
also
shows
the
Hide quick links:
Advertisement
Table of Contents
