Operating The Cd Player; Selecting A Track During Playback - T+A Elektroakustik K1 CD-RECEIVER Operating Instructions Manual

OPERATING THE CD PLAYER

To play a CD:
• Open the CD drawer
(
• Place a CD in the drawer, printed face up.
• Close the CD drawer
(
Note:
Closing the drawer with CD inserted causes
the K1 to automatically select CD mode.
Immediately the drawer is closed the ma-
chine reads the disc's "Table of Contents"; at
this point the screen shows 'READING'.
During this period the machine ignores all
button presses. The screen then shows the
current operating status and the total number
of tracks on the CD in the machine, e.g.:
'STOP 16'.
• Start the play process
Playback begins, and the screen shows the
operating status and the number of the track
currently playing: i.e. : 'PLAY 01'.
The CD stops at the end of the last track and
the screen again shows 'STOP' and the total
number of tracks on the CD.
Variations:
If you press the
ing the CD, the drawer closes and the play-
back process starts automatically with the
first track.
/ button)
/ button)
( button)
button after insert-
You can interrupt playback temporarily at
any time by pressing the
During the interruption the screen shows
'PAUSE'. Press the
time to resume playback.
If you press the
back, the player jumps to the start of the next
track. A long press (about 1 second) on the
button during playback causes the
player to jump to the start of the previous
track. If the button is held pressed in, the ma-
chine jumps back repeatedly until you release
the button.
The screen displays the word 'JUMP' while
it is jumping to the next or preceding track.
Pressing the
the playback process, and the screen shows:
'STOP'.
Pressing the
when the machine is in STOP mode opens
the CD drawer.

Selecting a track during playback:

Press the
it pressed in, until the number of the track
you want to listen to appears on the screen
after 'PLAY'.
When you release the button the machine
briefly interrupts playback, the screen shows
'JUMP', and then the selected track is
played.
Note:
You can also directly enter the number of the
track you want to hear using the numeric
buttons on the remote control handset.
33
button a second
button during play-
/ button ends
/ button again
button repeatedly, or hold
button.