Separate Volume Adjustment (Single Room / Multi-Room Mode) - T+A Elektroakustik K1 CD-RECEIVER Operating Instructions Manual

Menu point 4: SETUP - SETUP function 3: SEPARATE VOLUME ADJUSTMENT
press
AMP
4x
Introduction:
In normal the volume of the speaker output
A and B are controlled in common.
If you connect an additional remote control
receiver and a pair of loudspeakers to the
speaker connections
different living room), it is possible to adjust
the volume separately for the pairs of spea-
kers A und B.
If the system is set to multi-room mode,
only the loudspeakers in the room where the
user is located are switched on; the other
speakers keep quiet.
The volume for
sing the
front panel, or via the integral remote control
receiver.
The volume for B can only be adjusted via
an external remote control receiver (see also
"multi-room sound system" in the chapter
CONNECTING
SYSTEM IN USE).
SETUP
OK
B (preferably in a
A can only be altered u-
buttons on the machine's
THE SYSTEM,
press
AMP
2x
Operation:
To alter the option press the remote control
buttons in the sequence shown above. The
screen shows the current setting, e.g.
'VOL A/B'
or
'VOL A+B'
You can select the option with the
button.
The function is terminated by pressing the
If none of the menu control buttons
(
for a period of about ten seconds, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)
THE
20
VOL A/B
separate volume adjustment
(multi room sound system)
common volume adjustment
(single room sound system)
button.
, / or
OK
or
) are pressed