Project 3: Digital Ir Receiver Module - Keyestudio 4WD Bluetooth Multi-functional Car Manual

Project 3: Digital IR Receiver Module

Introduction:
IR is widely used in remote control. With this IR receiver, Arduino project is able to receive command from any IR remoter controller if you have the right
decoder. Well, it will be also easy to make your own IR controller using IR transmitter.
Specification:
Power Supply: 5V
Interface: Digital
Modulate Frequency: 38Khz
Module Interface Socket: JST PH2.0
NOTE: In the sample code below Digital pin 11 is in use, you may either change your wiring or change the sample code to match.
keyestudio
www.keyestudio.com 40