Keyestudio 4WD Bluetooth Multi-functional Car Manual page 104

keyestudio
Principle:
1.Ultrasonic detecting distance: one port emits high level more than 10 US. Once it outputting level, open potentiometer to time. When the port becomes low level,
read out current value. Use the time of detecting distance to calculate distance.
2.Use ultrasonic to detect the distance between obstacle and car, so that control the motion of the car according to the data.
3.If the distance between the car and obstacle is less than 35 cm, the car goes backward; if the distance is no less than 10 cm, the car goes forwards; if the distance
is less than 60 cm , the motor turns to detect the distance between car and left obstacle or right obstacle; if the distance between car and left obstacle, the distance
between car and right obstacle are less than 35 cm, the car goes backward; if the distance between car and left obstacle is larger , the car turns left; if the distance
between car and left obstacle is less than or equal to the distance between car and right obstacle, the car turns right.
Schematic Diagram：
www.keyestudio.com 102