Evolite HYBRID 17R User Manual page 22

Record: record the value of DMX512 that is currently received from the console to the selected scenes and
steps (remember: this operation directly covers the original value, please confirm the target
scene and steps to be recorded before recording.
Lamp power: setting lamp working power mode
The menu options are described as follows:
Half power: the bulb will work at the minimum power state of the license.
Full power: the bulb will work in the maximum power state of the license (if the shutter is closed, it will
automatically switch to a half power state).
Time / speed model:
Pan/Tilt: set up the speed channel of Pan & Tilt is speed mode or time mode
The menu options are described as follows:
Speed: Pan and Tilt run to the end at the speed set by the speed channel.
Time: Pan and Tilt will be sure to run to the end of the specified time point at the appropriate speed, that
is, Pan and Tilt can reach the end at the same time.
Scroll pattern: set up the speed channel of scroll Gobo wheel is speed mode or time mode .
The menu options are described as follows:
Speed: when the pattern is switched, the pattern is switched at the set speed.
Time: when the pattern is switched, the pattern switch is completed according to the set time.
Synchronous random strobe: whether or not a synchronous strobe is synchronized when a
multi lamp is set to a DMX value of the same random strobe
Display settings: LCD screen setting
Dormancy: the time to wait until the screen is dormant without a keystroke operation.
Brightness: adjust the screen brightness
Reverse display: set the screen content to reverse display. You can also display the start page status in
the menu, and press the "up" and "down" two keys to reverse the display switch.
Indicator light: select the light mode of the signal indicator.
The menu options are described as follows:
Auto: sleep with the screen
On: Always keep on a bright state
Advanced settings:
Fine tune: Factory debugging function, need password verification to enter.
Factory setting: factory setting test. The menu needs a password to operate.
No DMX: the running mode without DMX512 signal when turn on the machine. If with DMX512
signal when the machine is turned on and then the signal is lost, the last frame of the data is
always kept.
The menu options are described as follows:
Central: Except Pan and Tilt are in the middle, the whole other channels are zero.
Maintain: keep the initial state after the reset.
Auto (factory test / Gobo / color): run the program set up by the manufacturer, specifically
refer to the "run" menu before, to understand the characteristics of each self running mode.
Sound control: running sound control mode.
User program: running a user self-programming.
Fast positioning: using this function to automatically calculate the shortest path of color wheel
and Gobo wheel to achieve fast two-way positioning, that is to say, when positioning, it will
change over 180 degrees forward to less 180 degrees reversal. When the function is disused,
the color wheel and the Gobo wheel operate in a single direction.
Pattern coordination: choose whether the Gobo wheel is controlled automatically or not.
If automatic control, the following rules are executed automatically:
When the Gobo wheel is drawn out, the fixed gobo is automatically switched to the big hole.
When frost is working, the Gobo wheel automatically switched to the big hole.
Fan speed: set the fan speed control mode. Only suitable for some types of equipment.
Language: setting up the system language.
Turn off the lamp: set the motor function when the light lamp is OFF. "Dormancy" refers to the
cut off all the functions motor power supply (Pan & Tilt motors will not be cut off and can still
operate normally)
Restore the factory settings: restore all settings to the factory status (fine-tuning data, light
lamp switch state, user programming data and bulb time record will not be recovered).
.
Hybrid 17R Manual Ver. 1.00 Page 22