Downloading Files To A Computer; Menu Options And Settings - Insignia NS-DCDCHH2 User Manual

Downloading files to a computer

You can transfer files from your dash cam to a computer.
1 Remove the MicroSD memory card from your dash cam and insert it into a card reader on your computer. The memory
card appears as a mobile hard disk device in your list of files.
2 Download the files to your computer into a directory you can easily find.
3 On your computer, right-click the device, then select Eject from the option list that appears.
4 Remove the card and put it back in your dash cam.
Note: You can also connect the USB cable from the dash cam directly to your computer and access the MicroSD card files.

Menu options and settings

MENU OPTION
Menu Set Resolution
Screen display
Loop recording
Microphone setup
Exposure
Infrared lamp
Stamp setup
Language
Time setup
Driver ID setting
6
SETTING
Selects the camera resolution. You can select:
• 1080p F / 1080p R
• 1080p F / 720p R
• 720p F / 720p R
Sets what is displayed on-screen. You can select:
• Front to display the video outside your vehicle.
• Rear to display the video inside your vehicle.
• PIP (picture-in-picture) to display the front video with
a small window that displays the rear video.
PIP is the default setting.
Sets the time when the recording loop ends. You can select
1 min, 3 mins, or 5 mins.
When the memory card is full, your dash cam deletes the
oldest recordings to make room for new recordings. Your
dash cam does not automatically delete emergency
recordings. You must delete these recordings manually.
Turns the microphone On or Off.
Sets the white balance according to the available light. You
can select a setting between –2.0 and +2.0. The default
setting is +0.
Illuminates images in dark environments, such as night or
low light situations. You can select On, Off, or Auto.
Turns the date and time stamp On or Off. If you select On,
the date and time appear on the bottom of the screen.
You can also turn on the input feature and enter identifying
information, such as name, nickname, or make and model of
a vehicle.
Sets the OSD language. You can select English, Français, or
Español.
Sets the current date and time. Use the
select a number, then press the OK button to lock your
selection and move to the next number field. When you
finish, press the OK button to save your entry.
The date and time is part of the file name for each recording.
Lets you enter the vehicle license plate number. Use the

and buttons to select a number, then press the OK button
to lock your selection and move to the next number field.
When you finish, press the OK button to save your entry.
This information is stored as part of the time stamp.
www.insigniaproducts.com
 
and buttons to
