Insignia NS-DCDCHH2 User Manual page 7

MENU OPTION
Menu Set Button beep
(continued)
LCD auto off
Volume setting
WDR
Frequency
Format Memory Card
Default settings
Version Info
Feature Driver fatigue alarm
Remind lights
Motion detect
G-sensor sensitivity
SETTING
Each time you press a button, a beep sounds. You can turn
the beep On or Off.
Sets the amount of time before the screen saver turns on.
You can select 1 min, 3 mins, or Off.
Sets beep and speaker playback volume. You can select
MUTE, Low, Medium, or High.
(Wide Dynamic Range) Automatically adjusts the camera
exposure. You can select On or Off.
Light source frequency. You can select 50Hz or 60Hz.
Formats the memory card. Press the OK button to start
formatting.
CAUTION: When you format a memory card, it erases all the
data on the card. Make sure that you backup any recordings
you want to save. See
page 6.
Resets all dash cam settings to the factory defaults. Press the
OK button to reset.
Displays the system software version.
Displays the
rest. You can select 1h, 2h, 4h, or Off. If you do not stop for a
break, the alarm is repeated every 30 minutes.
If your dash cam detects a low light situation when you turn
on your vehicle, displays the
on your headlights. You can select On or Off.
When Motion detect is turned on, your dash cam
automatically starts recording when it detects movement
within 10 ft. (3 m), such as people walking. If no additional
motion is detected in 10 seconds, recording stops. Both
cameras support motion detection. You can select On or
Off.
When the G-Sensor detects an impact, it automatically
starts an emergency recording to save the recorded images
in a locked file. An emergency file cannot be overwritten by
the loop recording. The G-sensor sensitivity option lets
you adjust the G-sensor sensitivity. You can select High,
Medium, or Low.
www.insigniaproducts.com
Downloading files to a computer
icon and beeps once to remind you to
icon to remind you to turn
NS-DCDCHH2
on
7