Recording Video With Your Dash Camera; Taking Still Pictures With Your Dash Camera; Understanding Loop Recording; Using Emergency Recording - Insignia NS-CT1DC8 User Manual

SETTING
Default settings
Version information
Time setup
Headlights on
reminder
Motion detection
G-sensor

Recording video with your dash camera

1 Press the OK button to begin recording.
2 Press the OK button again to stop recording.

Taking still pictures with your dash camera

• Press the Camera button to take still pictures.

Understanding loop recording

When the MicroSD memory card in the dash camera is full, the camera
continuously overwrites the oldest footage recorded. To protect a specific
video clip against being overwritten, press the SOS Video button. The
emergency record icon appears on the screen. Files can also be protected
from the playback menu in Video Playback mode.

Using emergency recording

An emergency recording is initiated when the SOS Video button on the
lower left of the Video screen is pressed or when the G-Sensor registers an
impact. Emergency recordings create protected (locked) files that are not
overwritten by continuous loop recording. In addition, to make sure that
important footage isn't lost surrounding an incident, adjacent video clips
are locked if the incident happens within 30 seconds of the beginning or
end of a clip.

Downloading files from your dash camera

1 To download files from your dash camera, remove the MicroSD memory
card from your dash camera and insert it into a card reader on your
computer. The memory card will appear as a mobile hard disk device in
your list of files.
Restores the dash camera to the factory settings.
Displays the current system version.
Sets the system time setting.
Press to turn the headlight reminder on or off.
When turned on, video recording is automatically initiated when a
moving object is detected.
When the car is in a collision, the G-Sensor will automatically enter
the Event Recording Mode to record and save the recorded images
to the event video folder. The file is locked to ensure that files will
not be overwritten by Recycle Record. The G-sensor setting allows
you to adjust the sensitivity of the G-Sensor.
www.insigniaproducts.com
OPTIONS
Dash Camera
7