Time / Impulse; Feedback Signal To Pay System; Payment System Lock; Delete Paid Signal - Miele PDR 507 EL Marine Operating And Installation Instructions

Time / impulse

To be able to operate the tumble dryer
with conventional payment systems
where multiple coins can be inserted,
you can adjust how much time is pur-
chased each time a coin is inserted.
A time of between 5 and 60 minutes
can be set in increments.
Factory default: 30 minutes

Feedback signal to pay system

Setting the feedback signal for the
coin box.
– Factory default: Off
– End of programme
The feedback signal is sent at the
end of the programme.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and programme end
The feedback signal is sent at the
start and end of the programme.
– Programme running
The feedback signal is sent con-
stantly between the start and end of
the programme.
Supervisor level

Payment system lock

To avoid tampering, a programme lock
can be set up in programme opera-
tion. If the lock is applied, the pro-
gramme is interrupted and payment
credit is lost as soon as the door is
opened.
The time for the lock can be adjusted to
prevent laundry being added.
– Factory default: Off
– As soon as the programme starts
– 1 minute after the start of the pro-
gramme
– . . .
– 5 minutes after the start of the pro-
gramme

Delete paid signal

The "Paid" signal in coin box mode
can be applied until the end of the
programme or discarded if the pro-
gramme is not started after 5 minutes.
– Factory default: Off
– On
75