Sample calculation
A
Wall pipe, with inserted grille
= 1 x 3.8 m relative pipe length
B/D 2 bends, 90° plastic waste wa-
ter pipe
= 2 x 0.8 m relative pipe length
C
0.5 m plastic waste water pipe
= 0.5 x 1 m relative pipe length
Total duct length
Because the total duct length is less
than 20 m (according to table II), a pipe
diameter of 100 mm will be sufficient.
Exhaust air outlets on the back
of the tumble dryer
Sealing the air outlets
The ducting is installed on the right- or
left-hand side of the tumble dryer's
back panel. You must seal the unused
connection with a cap.
Installation of the ducting
Turn the cap to the left to remove it.
Press the cap firmly into the open air
outlet.
= 3.8 m
Dimensions of the exhaust air outlets
= 1.6 m
= 0.5 m
= 5.9 m
92
All measurements in mm
100
100
92
100
63