Symbol P370 Product Reference Manual page 60

P470/370 RF Scanner Product Reference Guide
Problem
The Scanner will not load
my ADF rule.
Note: If after performing these checks the symbol still does not scan,
contact your distributor or call the Symbol Support Center. See
Symbol Support Center
3-30
Table 3-1. Troubleshooting Table (Continued)
• Software download to the scanner while the scanner is
running the default application.
• Check that the scanner is successfully paired with the
cradle (see page 2-6).
• Check that the cradle and PC are connected using an
RS-232 cable.
• Software download or scanning a bar code sheet while the
scanner is running an MCL-Designer generated application
• Erase the MCL-Designer application from the
scanner's memory by scanning the "Reset Default
Application" bar code on page 3-10.
• The default application is now reinstalled and an ADF
rule can be loaded.
on page
Solution
page xi for the telephone number.