Removing The Battery; Replacing The Battery - Symbol P370 Product Reference Manual

P470/370 RF Scanner Product Reference Guide

Removing the Battery

1. Slide the release latch down using center indent and remove the cover.
Figure 4-1. Removing the Battery Compartment Cover
2. Slide the battery toward the bottom of the scanner and then pull the bottom of the
battery back and out of the scanner.

Replacing the Battery

1. Place the top portion of the battery (curved side up, contacts toward top) into the
scanner and then slide it up the handle.
2. Replace the battery compartment cover.
3. Slide the release latch up to secure the cover in place.
4-2
Battery
Compartment
Cover
Figure 4-2. Pulling the Battery Out
Battery
Release
Latch