Sony UHC-8300 Operating Instructions Manual page 45

MAINTENANCE
Page name Item
Page No.
<LENS2> REMOTE CONTROL
M06
CONTROL MODE
FOLLOW FOCUS
OFFSET ADJUST
SENS
OFFSET CANCEL
GAIN
CCU LENS DEMAND
<MIC GAIN> MIC1
M07
MIC2
<CALL/TALLY> CCU CALL
M08
CAM CALL
CAMERA NUMBER
CCU LINK
TALLY GUARD
EXTENDER
FILTER DISC
<SYSTEM FORMAT> CURRENT
M09 (U12)
<SYNC OUT> OUTPUT
M10 (U13)
V-PHASE
H-PHASE
<SDI OUT> SDI-1 OUT
M11 (U14)
SDI-2 OUT/IN
SDI-MONI OUT
CHARACTER
EMB AUDIO
<TRUNK> TRUNK
M12
INTERFACE
NETWORK TRUNK
LINK
<DATE> DATE/TIME
M13
DATE FORMAT
<BATTERY ALARM> BEFORE END
M14
END
<OTHERS> FAN MODE
M15
WHITE SETUP MODE
Settings
(OFF), ON
ZOOM & FOCUS, FOCUS,
FOLLOW FOCUS
1 to 5, 3
1 to 5, 3
DISABLE, ENABLE,
W/O FOLLOW
20, 30, 40, 50, 60 dB
20, 30, 40, 50, 60 dB
OFF, ON, ---
OFF, ON, ---
---, 1 to 96
OFF, ON
OFF, ON
OFF, ON
SD-SYNC, HD-SYNC
–999 to +999, 0
–999 to +999, 0
OFF, MAIN/LINK-A, 3G-SDI,
HD PROMPTER, 4K VF,
4K PROMPTER
OFF, MAIN/LINK-B OUT,
HD TRUNK IN
OFF, VF, MAIN, RET
ON, OFF
OFF, MIC, PGM
ON, OFF
232c, 422A
2000 to 2099/01 to 12/00 to 31
00 to 23 : 00 to 59
1 Y/Mn/D, 2 Mn/D, 3 D/M/Y,
4 D/M, 5 M/D/Y, 6 M/D
11.5 to 17.0 V
11.0 to 11.5 V
OFF, AUTO1, AUTO2, MIN, MAX AUTO1: Normal rotation
AWB, A.LVL
45
Description
Defaults to (OFF) when a supported lens is not
attached.
Sets the sensitivity of superimposing the offset of the
MSU.
Sets the sensitivity of canceling the offset on the
demand side.
DISABLE: Disables the lens demand controller
connected to the CCU.
ENABLE: Enables the lens demand controller
connected to the CCU.
W/O FOLLOW: Disables the lens demand controller
connected to the CCU only when CONTROL MODE
is set to FOLLOW FOCUS.
Display only
Selects whether TALLY lights for CALL signal.
ON sets CAMERA NUMBER to the same number as
the CCU number.
Selects whether to prevent changes while TALLY is lit.
Displays the current format (display only)
FRAME SYNCHRO is fixed ON when HD TRUNK IN
is selected.
Display only
Y: Year
Mn: Month (numeric)
M: Month (English abbreviation)
D: Day
AUTO2: Slow rotation