Troubleshooting - Symbol QRG PDT 8100 Quick Reference Manual

P D
w i t h
2 0 0 3
• If the surface of the terminal screen becomes soiled, clean it with a
soft cloth moistened with a diluted window-cleaning solution.

Troubleshooting

Problem
Terminal does not
turn on.
Rechargeable
lithium-ion bat-
tery did not
charge.
Cannot see char-
acters on display.
T 8 1
W i n d
f o r
Cause
Lithium-ion bat-
tery not charged.
Lithium-ion bat-
tery not installed
properly.
System crash.
Battery failed.
Terminal re-
moved from cra-
dle while battery
was charging.
Terminal not pow-
ered on.
0 0 S
o w s
P o c k
Charge or replace the lithium-ion
battery in the terminal.
Ensure battery is installed properly.
Perform a soft reset. If the terminal
still does not turn on, perform a
hard reset. See
Terminal on page 25.
Replace battery. If your terminal
still does not operate, try a soft re-
set, then a hard reset; see
ting Your Terminal on page
Insert terminal in cradle and begin
charging. The 1950 mAh lithium-
ion battery requires up to 2 1/2
hours to recharge fully.
Press the Power button.
28
e r i e s
M o b i
e t P C
Solution
Resetting Your
Reset-
25.
l e
s