Charging The Battery - Symbol QRG PDT 8100 Quick Reference Manual

P D
w i t h
2 0 0 3

Charging the Battery

Charging the Main Battery and Memory Backup Battery for
the First Time
Before using your terminal for the first time, charge the lithium-ion battery
in the terminal for a minimum of 12 hours, with the terminal off. Charge the
battery using the Serial/Charging Cable or the appropriate cradle. This is
the time needed to fully charge the main battery and the internal backup
battery in a terminal that is off.
Recharging the Main Battery
To recharge the 1950 mAh lithium-ion battery in the terminal, turn the
terminal off and charge the battery for approximately 2 1/2 hours using the
Serial/Charging Cable or the appropriate cradle.
Note: The battery can also be recharged separately in the CRD
8100-1200S Single Slot Charging Cradle, VCD 8100-R001
Vehicle Charging Cradle, or UBC battery adapter.
Charging the Battery Using a Cradle
Charge the battery in the terminal using the CHS 8100-4000C Four Slot
Charge Cradle, CRD 8100-1200M Single Slot Modem Cradle, VCD 8100-
R001 Vehicle Charging Cradle, CRD 8100-1200S Single Slot Charging
Cradle, or CRD 8100-4000E Four Slot Ethernet Cradle. For more
information, refer to the set up instructions in the respective Quick
Reference Guides.
T 8 1
W i n d
f o r
0 0 S
o w s
P o c k
8
e r i e s
M o b i
e t P C
l e
s