Table of Contents
Advertisement
''Water'' indicator Is on.
"Ice" Indicator is on.
''Water'' and "Ice" indicator
are both flashing.
Ice cubes stick together.
Ice making cycle is normal high.
but no Ice is made.
Ice Maker is leaking water
The Ice cubes are melting.
Water is low.
Ice basket is full.
Ice shovel is stuck.
Ice making cycle is too long.
Water temperature in inner tank is
too low.
Ambient temperature or water
temperature in inner tank is too
1---------------+- - - -------- - - - --i
Refrigerant liquid leakage.
Pipe in the cooling system is
blocked.
The water drainage cap may be
not be tightened properly.
Location of appliance may cause
temperature changes.
Also constant opening and
shutting of the lid may also cause
variable temperature fluctuations.
Leaving ice in the appliance for an
extended period of time may also
result in the appliance recycling
the ice by melting it down and
making a new batch.
7
Stop the ice maker, fill water, and restart.
Remove ice from ice basket.
Check if ice is blocking the ice shovel,
otherwise, consult a certified technician.
Stop the ice maker, and restart when the
ice blocks melt. Select the small ice
size.
Change the water in the reservoir. Use
water between 45
°
F-90
°
F.
Please operate the ice maker below
ambient temperature of 90
°
cold water.
Consult a qualified technician.
Consult a qualified technician.
Tighten the drainage cap.
Avoid leaving the lid open.
Transfer ready-made ice to another
container and store in a cooler or freezer
to avoid recycling.
F and use
Hide quick links:
Advertisement
Table of Contents
