Advertisement
17.
W
X
M6x20 Button
Large Worksurface
Head Bolts
Fixing Bracket
W
W
W
W
4mm Allen Key
W
X
Attach the worksurface fixing brackets (X&Y) to the Den structure using 1xM6x20mm socket button head machine screw (W) per small bracket (Y) and 2xM6x20mm socket button
head machine screws (W) per large bracket (X), in the positions shown above. Use the top holes/slots for a 730mm worksurface height and the bottom for a 750mm worksurface
height. (see above)
When fixing the small brackets (Y) to the structure, make sure to pass the machine screws (W) through the 7mm hole. When fixing the Large brackets (X) to the structure, make sure
to pass the machine screws (W) through the horizontal slot.
18.
1400w Den.Cube = 1300w Worksurface
1600w Den.Cube = 1500w Worksurface
W
W
W
W
4mm Allen Key
Y
Small Worksurface
Fixing Bracket
Lower the worksurfaces (G&H) onto the brackets (X&Y) attached to the structure in
steps 17. Attach the worksurface fixing brackets (X&Y) to the underside of the
worksurfaces (G&H) using 1xM6x20mm socket button head machine screw (W) per
small bracket (Y) and 2x M6x20mm socket button head machine screws (W) per large
bracket (X).
DEN.Cube Assembly Instructions
Y
Small Worksurface
Fixing Bracket
W
W
W
W
Y
730mm Worksurface
height
750mm Worksurface
height
G-1
W
M6x20 Button
Head Bolts
W
W
W
W
H -1
Return
Worksurface
X
Large Worksurface
Fixing Bracket
W
M6 x 20mm Button
Head Bolts
(x9 per Worksurface)
X
FRONT
BACK
19.
W
Underside View
To secure the 2 worksurfaces (G&H), attach the junction connector plate (S), using
4xM6x20mm socket button head machine screws (W), in the position shown above.
Repeat steps 17 - 19 for all units.
C L
250
Y
25
DWG No: SASS-0074
Revision: A (03/11/15)
Drawn by: CE
Drawn date: 08/09/15
X
FRONT
BACK
X
FRONT
BACK
S
W
Advertisement
