Advertisement
5.
Attach the 1250w back panel (F-1) to the 3-way junction (B-1) as shown above (see
step 1 for method).
7.
Sub-Assembly B - 1
B-2
3-Way Junction (90°)
Attach the 850w side panel (E-1) into the keyholes in the 3-way junction (B-2), making
sure that all of the screws have engaged into the keyholes.
DEN.Cube Assembly Instructions
F-1
1250w Back Panel
E-1
850w Side Panel
6.
Z
Bottom Connector Link
Tap the top of the 1250w back panel (F-1) with a cushioned mallet to fully engage. Tie
the 1250w back panel (F-1) and the 3-way junction (B-1) together using a bottom
connector link (Z). (See step 2 for method)
You have now fully assembled sub-assembly A - 1, safely secure this sub-assembly until
step 14 where it shall be used in the main assembly of the cube.
8.
Z
Bottom Connector Link
Tap the top of the 850w side panel (E-1) with a cushioned mallet to fully engage.
Tie the 850w side panel (E-1) and the 3-way junction (B-2) together using a bottom
connector link (Z).
DWG No: SASS-0074
Revision: A (03/11/15)
Drawn by: CE
Drawn date: 08/09/15
Advertisement
