Advertisement
9.
E-2
850w Side Panel
Attach the 850w side panel (E-2) to the the 3-way junction (B-2) as shown above (see
step 1 for method).
11.
Attach the 1050w/1250w (module dependent) back panel (C-1) to the 3-way junction
(B-2) as shown above (see step 1 for method).
DEN.Cube Assembly Instructions
C-1
1400w Den.Cube = 1050w Back Panel
1600w Den.Cube = 1250w Back Panel
10.
Z
Bottom Connector Link
Tap the top of the 850w side panel (E-2) with a cushioned mallet to fully engage.
Tie the 850w side panel (E-2) and the 3-way junction (B-2) together using a bottom
connector link (Z). (See step 2 for method)
12.
Z
Bottom Connector Link
Tap the top of the 1050w/1250w (module dependent) back panel (C-1) with a
cushioned mallet to fully engage. Tie the 1050w/1250w (module dependent) back
panel (C-1) and the 3-way junction (B-2) together using a bottom connector link (Z). (See
step 2 for method)
You have now fully assembled sub-assembly B - 1, safely secure this sub-assembly until
step 14 where it shall be used in the main assembly of the cube.
DWG No: SASS-0074
Revision: A (03/11/15)
Drawn by: CE
Drawn date: 08/09/15
Advertisement
