Advertisement
1.
Sub-Assembly A - 1
B-1
3-Way Junction (90°)
Insert the modular screws in the 650w side panel (A-1) into the keyholes in the 3-way
junction (B-1), making sure that all of the screws have engaged into the keyholes.
3.
A-2
650w Side Panel
Attach the 650w side panel (A-2) to the the 3-way junction (B-1) as shown above (see
step 1 for method).
DEN.Cube Assembly Instructions
A-1
650w Side Panel
After making sure all of the screws are engaged in the keyholes, tap the top of the
650w side panel (A-1) with a cushioned mallet to fully engage. Tie the 650w side
panel (A-1) and the 3-way junction (B-1) together using a bottom connector link (Z).
Insert this over one of the levellers (between the nut and the bottom of the
panel/junction) in the hooked slot and pivot around to insert the other leveller into the
straight slot. Fully tighten both nuts using a 13mm spanner to trap the connector (Z).
Tap the top of the 650w side panel (A-2) with a cushioned mallet to fully engage.
Tie the 650w side panel (A-2) and the 3-way junction (B-1) together using a bottom
connector link (Z). (See step 2 for method)
2.
Z
Bottom Connector Link
Junction
Panel
Connector
M8 nut
Leveller
4.
Z
Bottom Connector Link
DWG No: SASS-0074
Revision: A (03/11/15)
Drawn by: CE
Drawn date: 08/09/15
Advertisement
