Advertisement
13.
Sub-assembly
A - 1
650w Side
Panel
650w Side
Panel
Sub-assembly
A - 2
Repeat steps 1 - 6 to assemble Sub-assembly A - 2 and repeat steps 7 - 12 to
assemble Sub-assembly B - 2.
Safely secure each sub-assembly, until step 14 where it shall be used in the main
assembly of the cube.
15.
Tap the top of the 1250w back panel (F-1) of sub-assembly A-1 with a cushioned
mallet to fully engage.
Tie the 1250w back panel (F-1) of sub-assembly A-1 and the 4-way junction (D)
together using a bottom connector link (Z). (See step 2 for method)
DEN.Cube Assembly Instructions
Sub-assembly
B - 1
850w Side
Panel
850w Side
Panel
Sub-assembly
B - 2
Z
Bottom Connector
Link
14.
Sub-assembly A - 1
650w Side
Panel
Attach the 1250w back panel (F-1) of sub-assembly A-1 to the 4-way junction (D) as
shown above (see step 1 for method).
16.
Sub-assembly B - 1
Sub-assembly A - 1
Repeat steps 12 - 13 to attach sub-assembly A-2, sub-assembly B-1 and
sub-assembly B-2 to the 4-way junction (D), as shown above.
D
4-Way Junction
Sub-assembly A - 2
Sub-assembly B - 2
DWG No: SASS-0074
Revision: A (03/11/15)
Drawn by: CE
Drawn date: 08/09/15
Advertisement
