Basket Removal; Lock Release Button - Baby Jogger City Tour Assembly Instructions Manual

WARNING: Always use the crotch
EN
strap in combination with the
shoulder straps and waist belt.
16 Slide the harness pads up to access
plastic guide on strap.
17 Hold the plastic guide and pull strap
to tighten or loosen.
USING SAFETY HARNESS
18 Insert side strap buckle into harness
buckle on both sides.
19 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
20 Press button on crotch buckle to
release.
RECLINE THE SEAT
21 Pinch the clamp behind the seat,
and slide it down to desired recline.
22 Pull seat down on both sides to
match the clamp position. Reverse
steps to return to the upright
position.
WARNING: When making
adjustments to the stoller seat,
make sure child' s head, arms, and
legs are clear of moving seat parts
and stroller frame.

BASKET REMOVAL

23 Unfasten the snaps of the Basket
from the front, rear, and under the
back support bar.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all
items from basket.
24 Squeeze the fold button on the
handle bar and fold the frame
forward.
25 Push the red lock release button.
26 Pull up on the "Pull to Fold" folding
handle and let the frame colapse.
27 Make sure the auto-lock lever clicks
into place.
REMOVING THE SEAT FABRIC
28 Unsnap the seat fabric from the
seat frame on both sides.
29 From the underside of the seat,
unfasten the hook-and-loop and
slide the strap through the D-ring.
30 Remove the "Pull to Fold" folding
handle from the frame by
unfastening the triangle carabiner
hooks and slide the straps through
the seat.
31 Pull the seat fabric out of the
channels in the frame.
CARRY BAG
32 Unzip carry bag storage pocket, fold
your stroller, place stroller into carry
bag.
33 To store the carry bag: Fold the
carry bag tightly, place into the
storage pocket, and zip the pocket.
10